Skip to main content

September 2020

New! PON-50 - Passive Optical Network Power Meter for BPON/EPON/GPON

Designed to perform live testing with OLT equipment, this PON Power Meter is perfect for use during FTTx/PON service tune-up or maintenance. It is able to simultaneously test and measure the signal power of voice, data, and video connections, and is essential for the construction and maintenance of PON systems. This Power Meter also features the following:

See Product Detail

New! WSC-1412 - Cable Stripper for 14/2 & 12/2 NM Cable

Designed to strip the jacket and insulated conductors from 12/2 and 14/2 NM cables, The tool also has a wire cutter and serrated nose built-in for added convenience:

See Product Detail

New! TTBW-158 - Barrel Lock Plunger Key Size #6

Specifically designed to unlock Highfield 93180128 and 93180124 locks, this #6 key is able to unlock utility box locks with inside diameters of 0.158".  This barrel lock key features the following:

  • Made from High Carbon alloy steel for heavy-duty use
  • Smooth plunger operation and heavy-duty spring designed for high strength and durability
  • The tool is serialized for extra protection
  • Designed to work on #6 locks such as Highfield lock numbers 93180128, 93180124
See Product Detail

New! RFS-100 - Rollable Ribbon Fiber Separator

RFS-100

Designed for use on Rollable or Spyder type ribbon fiber optic cables, this tool is perfect for separating the matrix of fibers in ribbon fiber optic cables quickly and easily. This tool also features the following:

  • Can be used on Rollable or Spyder type ribbon fiber optic cables that contain up to 24 optical fibers each

  • Coil spring applies a set amount of pressure, keeping the fibers safe while being separated

  • Compact lightweight design is perfect for storage or on-the-go use

See Product Detail

New! MF-25/25 - Magtime Hook & Loop Holder (Pack of 25)

Magtime Hook & Loop Holder (Pkg 25). Made of neodymium (a rare earth magnet), these cable holders quickly and easily allow the technician to install cables without any drilling, screwing or nailing required. These powerful magnets can hold a substantial number of cables based on the size chosen. Hang wires in high places from the ground using a telescopic pole with the cable pole adapter. A Quick Easy Permanent installation that can easily be removed in seconds. Use with zip ties and velcro.

See Product Detail

New! JIC-4055 - Impact Insertion Tool for 3M MS2 Cross-Connect Modules

This impact insertion tool is designed to terminate wires on 3M MS2 cross-connect panels quickly and easily. This insertion tool also features the following:

  • Automatically terminates wires onto cross-connect panels without disturbing other connections
  • Slim design allows you to use the tool in compact or hard-to-reach places
  • Ergonomically designed handle is comfortable and easy to use
  • Holes in the bottom of the handle so tool can be tethered
See Product Detail

August 2020

New! AST-200 - CableSaber™

B
The Jonard Tools CableSaber™ is the ultimate tool for gaining mid-span access to armored or thick jacketed cables 4 mm-28.6 mm (0.157”-1.125”) in diameter. This mid-span cable slit and ring tool also features the following:

See Product Detail

July 2020

New! PSI-15 - QuickSleever

Loading a protection sleeve onto a fiber can be tedious, even for the most experienced technicians. Plus, if they have physical impairments such as poor eyesight then it can become nearly impossible. Designed to make loading protection sleeves onto fiber quick and easy, the PSI-15 QuickSleever tool is ideal for aligning fiber to the holes of protection sleeves and is a real timesaver. This protection sleeve insertion tool features the following:

See Product Detail

WSS-4625 - Web Slitter & Shaving Tool

Designed to slit and shave the webbing off messengered hardline COAX cables and figure 8 fiber cables, the Jonard Tools WSS-4625 Web Slitter and Shaver is the perfect tool for working with aerial messenger cables ranging from 0.400"-0.625" in diameter. This web slitter and shaver also features the following:

See Product Detail

RCS-30 - Ratcheting Duct and Cable Slitter

Designed to create mid-span slits and window cuts in ducts and heavy-duty cables, this ratcheting cable slitter is the perfect tool for slitting and ringing cables or ducts greater than 25 mm in diameter. This duct slitter features the following:

See Product Detail

RCS-30RB - Replacement Blade for RCS-30

This product is the replacement blade for the RCS-30 Ratcheting Duct and Cable Slitter. This blade is made of steel for high durability and long life. It penetrates duct walls up to 5 mm thick, allowing you to make mid span window cuts in cables and ducts.

See Product Detail

WSS-4625RB - Replacement Blade Cartridge for WSS-4625 Web Slitter & Shaver

This product is the replacement blade cartridge specifically designed for the WSS-4625 Web Slitter and Shaving Tool. This replacement blade cartridge features the following:

  • Ultra-sharp steel slitting blade slits even the thickest webbing with ease
  • Shaving blade removes excess webbing to provide smooth surface for cable termination
  • For use with WSS-4625 on cables 0.400"-0.625" in diameter
See Product Detail

June 2020

JIC-190 - Flush Cut Kevlar® Cutters

The Jonard Tools JIC-190 Flush Cut Kevlar® Cutters are designed to cut Kevlar®, cabling insulation, tape, cable ties, and other materials flush to the surface. These cutters feature the following:

See Product Detail

HDMI-100 - HDMI Cable Tester

Designed to test HDMI and Mini HDMI cables with ease, this HDMI Cable Tester is the perfect tool for evaluating HDMI cables that may have shorts, open circuits, or have wire pairs in the wrong order. This HDMI tester features the following:

See Product Detail

EZSR-23 - Fiber Slit & Ring Tool for EZ!Fuse™ SC & LC Splice-On Connectors

The EZSR-23 Fiber Slit & Ring Tool has been specially designed to prepare 2 mm and 3 mm fiber optic cables for connecting with Fitel EZ!Fuse™ SC & LC Splice-On Connectors. This tool saves time and makes the connecting process extremely easy by having a ringing dial and slitting channel with preset lengths. This slit and ring tool also features the following:

See Product Detail

SPK-100 - Solar Panel MC3 & MC4 Crimping Tool Kit w/ Insulated Screwdrivers

The Jonard Tools SPK-100 Solar Panel Crimping Tool Kit w/ Insulated Screwdrivers is designed to facilitate the installation and maintenance of solar panels. It includes a variety of tools to make installing and maintaining solar panels quick and easy.

This crimping and insulated screwdriver tool kit include the following tools:

See Product Detail

TK-183 - Fiber Optic Connector Clean and Prep Kit

The Jonard Tools TK-183 Fiber Optic Connector Clean and Prep Kit offers cleaning and preparation products for use on 1.25 mm and 2.5 mm connector end-faces and bulkhead adapters. The kit features the following:

See Product Detail

May 2020

UKN-3 - Heavy Duty Utility Knife

Designed for heavy duty use, this utility knife is the perfect addition to any tradesman or technician's tool kit. This utility knife features the following:

See Product Detail

UKN-50RB - Heavy Duty Utility Knife Replacement Blades, P/50

Made in the USA, this pack of 50 utility blades is perfect for replacing blades in a utility knife, such as our UKN-3. These utility blades feature the following:

  • Ultra-sharp US-made 1095 carbon steel heavy duty blades cut through drywall, zipties, packaging, and more with ease
  • Blades are made according to standard utility blade specifications and are compatible with all standard utility knives
  • Dull or damaged blades can be stored in the top of the unit for easy clean up
  • Blade dispenser has two hanging holes for wall mounting
See Product Detail

April 2020

TK-179 - Advanced Fiber Prep Kit

advanced fiber optic prep kit tk-179 tk179 tk 179

The Jonard Tools TK-179 Advanced Fiber Optic Prep Kit provides an array of tools needed to access and prepare a fiber optic cable for termination. It includes a carrying case and a variety of tools for multiple applications such as stripping, ringing, cutting, cleaning, and preparation of fiber optic cable. This tool kit is ideal for any fiber optic technician.

See Product Detail

KN-100INS - Insulated Cable Sheathing Knife

Designed with a curved blade and insulated handle, this cable sheathing knife is the perfect tool for slitting or cutting the sheathing off cables without damaging the conductor insulation inside. This cable sheathing knife features the following:

See Product Detail

March 2020

CC-2721WS - Steel Cable Caddy with Wheels & Pull Strap, 21" Wide

The Jonard Tools CC-2721WS Cable Caddy is made of 7/8” (22 mm) diameter tubular steel, includes wheels, and has a permanently mounted strap for enhanced portability. This cable caddy features the following:

See Product Detail

CTW-7163812 - F Connector Torque Wrench, 30 in-lb, 8" and 12"

Designed for torquing F connectors to a preset torque of 30 in-lb (3.4 N-m), this torque wrench is perfect for tightening or loosening F connectors in high-density locations. This torque wrench features the following:

See Product Detail

February 2020

UC-4569 - RJ11/12, RJ45 Pass-through Modular Crimping Tool 6-in-1

Designed to crimp RJ11/12 and RJ45 connectors onto CAT3, CAT5/5E, and CAT6 cables, this pass-through connector crimper is perfect for any network installer. This crimper features the following:

See Product Detail

FLS-50 - Optical Light Source with FC/LC/SC Adapters for PC/UPC Connectors

Designed to provide either 1310 nm or 1550 nm wavelengths, this optical light source is the perfect tool for providing a stable light source for single mode fiber measurements. This optical light source features the following:

See Product Detail

TWAF-22176 - Torque Wrench, Full Head 22 mm, 176 in-lb

Designed for tightening 3.5-12 DIN connectors to 176 in-lb (20 N-m), this full-size open head torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening. This torque wrench features the following:

See Product Detail

CTW-71638 - F Connector Torque Wrench, 30 in-lb, 8"

Designed for torquing F connectors to 30 in-lb (3.4 N-m), this torque wrench is perfect for tightening or loosening F connectors in high-density locations. This torque wrench features the following:

See Product Detail

CTW-716312 - F Connector Torque Wrench, 30 in-lb, 12"

Designed for torquing F connectors to 30 in-lb (3.4 N-m), this torque wrench is perfect for tightening or loosening F connectors in high-density locations. This torque wrench features the following:

See Product Detail

CTW-7168 - F Connector Torque Wrench Shaft, 8"

Designed for torquing 7/16" F connectors, this torque wrench shaft is made for use with our CTW-H handle (sold separately) to tighten or loosen F connectors in high-density locations. This shaft features the following:

See Product Detail

CTW-71612 - F Connector Torque Wrench Shaft, 12"

Designed for torquing 7/16" F connectors, this torque wrench shaft is made for use with our CTW-H handle (sold separately) to tighten or loosen F connectors in high-density locations. This shaft features the following:

See Product Detail

CTW-H - F Connector Torque Wrench Handle

Designed for use with our CTW-7168 or CTW-71612 F connector torque wrench shafts (sold separately), this handle can be used to tighten or loosen F connectors in high-density locations. This handle features the following:

See Product Detail

UC-4569RB - Replacement Blade Set for UC-4569

This product is the replacement blade set for the UC-4569 Pass-Through Crimping Tool and includes 6 replacement blades. The blades are made for heavy-duty use and can perform up to 3,000 cuts. This replacement blade set includes (2) cable-cutting blades, (2) pass-through cutting blades, and (2) stripping blades.

See Product Detail

January 2020

CST-4000 - Round Cable Strip & Ring Tool for Large Cables

The big brother to our popular CST-1900, the patented CST-4000 Round Cable Strip & Ring Tool is designed for fast and precise removal of cable jackets from round cables that are 3/4” to 1 5/8” (19 mm to 40 mm) in diameter. This round cable stripper features the following:

See Product Detail

FCT-200 - Fiber Connector Tool for LC Connectors

Designed to insert and extract LC connectors in high-density patch panels, the FCT-200 is the perfect tool for working with LC connectors in tightly packed bulkheads. This tool features the following:

See Product Detail

TETP-800 - Cable Tester Tone & Probe Kit

Designed to quickly trace and identify cables, wires, and wire pairs, the Jonard Tools TETP-800 tone and probe kit is the perfect kit for any Voice Data Video (VDV) professional. This kit features the following:

Tester & Tone Generator:

  • Provides tone via built-in RJ11 connector or alligator clips
  • Works with our TEP-100 tracing probe or others to identify cables
  • Able to test the continuity of cables and the polarity of telephone lines
  • Includes (1) 9V battery required for operation

Tracing Probe:

See Product Detail

FDS-312 - Fiber Drop Cable Stripper

Designed to strip FTTH drop cables sized 3.1 mm by 2.0 mm, this drop cable stripper strips the outer jacket of drop cables and cuts the strength members to expose the fiber inside. This drop cable stripper features the following:

  • Works on cables with FRP or steel strength members
  • Removes the outer jacket without damaging or nicking the fiber
  • Non-slip ergonomic handle helps prevent hand grip fatigue
  • Fiber support is scaled to help determine strip length
See Product Detail

CG-100 - COAX Cable Gripping Tool

Designed to grip RG59, RG6, RG7, and RG11 cables, this COAX cable gripping tool facilitates the stripping, slitting, splicing, and other functions of coaxial cables. This cable gripping tool features the following:

  • Perfect for gripping RG59, RG6, RG7, RG11, and many other cables
  • Soft rubber material conforms to the shape of the cable to grip it tightly
  • Compact shape and belt loop hole make it convenient for storage and transport
  • Two separate gripping grooves for multiple cable sizes: 3 mm to 6 mm diameter and 6 mm to 12 mm diameter
See Product Detail

TSW30G-0100 - 30 AWG Tefzel® Wire, Green, 100 ft

Tefzel®, also referred to as ETFE (ethylene tetrafluoroethylene copolymer), is a thin but resilient insulation material designed for aerospace applications. It is ideal for use as appliance, panel, or wrapping wire and can also be used in the installation of aviation electronics equipment. Tefzel® wire’s excellent material toughness, electrical properties, and resistance to heat flames, chemicals, and radiation make it the perfect wire where high durability is required. Our Tefzel® wire also features the following:

See Product Detail

December 2019

SPC-MC4 - Solar Panel Crimper with Included MC4 Die

Designed to crimp MC4 connectors onto 14, 12, or 10 AWG (2.5 / 4.0 / 6 mm2) solar panel wire, this crimper is the perfect tool for installing and maintaining solar panel connectors. This crimper features the following:

See Product Detail

SPK-90 - Solar Panel MC3 & MC4 Crimping Tool Kit

The Jonard Tools SPK-90 Solar Panel Crimping Tool Kit is designed to facilitate the installation and maintenance of solar panels. It includes a variety tools to make installing and maintaining solar panels quick and easy.

This crimping tool kit includes the following tools:

See Product Detail

RBNC-3 - Compact BNC Connector Tool

Designed to provide easy access to BNC connectors, this 2.25” BNC Connector Tool is perfect for installing or removing BNC connectors in high-density locations. This tool features the following:

  • Compact design allows you to reach connectors in hard-to-reach places
  • Knurled handle provides a secure grip while using the tool
  • Steel loop can easily attach to a carabiner or key ring and can be used to facilitate removal or installation of connectors
  • Made from a high carbon steel alloy with a nickel-plated finish for maximum durability
See Product Detail

SPD-MC3 - Solar Panel MC3 Crimper Die

This crimping die, when used in conjunction with a Solar Panel Crimper (such as our SPC-MC4), is able to crimp MC3 connectors onto 14, 12, and 10 AWG (2.5 mm², 4 mm², 6 mm²) cable. It is ideal for solar panel installers when termination or replacing a new MC3 solar panel connector. The crimping die features the following:

  • Crimps wire gauges sizes 14, 12, 10 AWG (2.5 / 4.0 / 6.0 mm²)
  • Perfectly crimps MC3 Solar Connectors
  • Compatible with ratcheting solar crimping tools, like our SDC-MC4
See Product Detail

SPD-MC4 - Solar Panel MC4 Crimper Die

This crimping die, when used in conjunction with a Solar Panel Crimper (such as our SPC-MC4), is able to crimp MC4 connectors onto 14, 12, and 10 AWG (2.5 mm², 4 mm², 6 mm²) cable. It is ideal for solar panel installers when termination or replacing a new MC4 solar panel connector. The crimping die features the following:

  • Crimps wire gauges sizes 14, 12, 10 AWG (2.5 / 4.0 / 6.0 mm²)
  • Perfectly crimps MC4 Solar Connectors
  • Compatible with ratcheting solar crimping tools, like our SDC-MC4
See Product Detail

SPS-2 - Solar Panel Spanners for MC4 Connectors (Pack of 2)

Designed to lock and unlock MC4 connectors for termination or removal, these solar panel spanners are ideal for solar panel installers when terminating or replacing a new MC4 solar panel connector. These solar panel spanners feature the following:

  • Made from hard plastic for high durability and long life
  • Perfect for breaking MC4 connections that have been locked together
  • Great for tightening cable glands on MC4 connectors
  • Lightweight and easy to use design
See Product Detail

November 2019

FOR-3000 - Fiber Optic Round Cable Slitter

The Jonard Tools FOR-3000 Round Cable Slitter is designed to easily and safely open round fiber optic cable jackets from 9 mm to 19 mm in diameter. It is ideal for any FTTH or maintenance technician that needs to work with round fiber optic cables, whether mid span or end-run. This round cable slitter features the following:

See Product Detail

MDC-28 - Micro Duct Cutter

Designed to create quick, clean, and straight cuts in fiber ducts up to 28 mm, this duct cutter is perfect for cutting PVC, CPVC, HDPE, and other plastic tubing. The micro duct cutter features the following:

  • Triangular blade provides square and straight cuts by holding the tubing in place
  • Spring-loaded jaws make it quick and easy to use
  • Carbon steel blade with black oxide finish is durable and easily replaceable
  • Safety lock keeps tool close when not in use
  • Molded ribbed grips for comfort and secure holding
See Product Detail

RDG-9 - 9 ft Compact Glow Rod Kit, 3/16" Diameter

Designed to facilitate telecom and datacom installations, these glow rods are the perfect tool for pushing and pulling cables in low light applications. These glow rods feature the following:

See Product Detail

October 2019

TWAF-2244 - Torque Wrench, Full Head 22 mm, 44 in-lb

Designed for tightening 4.3-10 DIN connectors to 44 in-lb (5 N-m), this full-size open head torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening. This torque wrench features the following:

See Product Detail

FCCN-250 - Fiber End-Face Ferrule Cleaner, Angled Head, 2.5 mm

The Jonard Tools FCCN-250 Fiber End-Face Ferrule Cleaner is designed to provide exceptional cleaning performance on fiber optic connectors. It cleans 2.5 mm ferrules in recessed fiber optic adapters or individual FC, SC, or ST connectors. This cleaner features the following:

See Product Detail

HSC-715QR - Hardline Strip & Core Tool Kit for QR715 Cable

The HSC-715QR hardline coring and stripping tool kit is designed to core and strip 0.715” (18.16 mm) diameter Quantum Reach cables such as QR715 cable and other similar sized cables. This kit is used by construction crews, cable splicers, and maintenance technicians on hardline cables whether aerial or underground and for distribution or drop applications.

See Product Detail

FC-500 - Precision Fiber Cleaver

The Jonard Tools FC-500 precision fiber cleaver is designed to provide a precise cleave and prepare a fiber to be fusion spliced for 250 µm and 900 µm coated optical fiber. This fiber cleaver features the following:

See Product Detail

September 2019

WS-822 - Wire Stripper and Cutter, 8-22 AWG

The Jonard Tools WS-822 Wire Stripper and Cutter was designed with the technician and tradesman in mind. This wire stripping and cutting tool features the following:

See Product Detail

RJ45-5100 - RJ45 CAT5e Pass-Through Connectors (Pack of 100)

The Jonard Tools RJ45 CAT5e Pass-Through Connectors are used by network installers/technicians in order to terminate CAT5e network cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating a round network cable or even replacing an existing connector. These connectors feature the following:

See Product Detail

RJ45-550 - RJ45 CAT5e Pass-Through Connectors (Pack of 50)

The Jonard Tools RJ45 CAT5e Pass-Through Connectors are used by network installers/technicians in order to terminate CAT5e network cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating a round network cable or even replacing an existing connector. These connectors feature the following:

See Product Detail

RJ45-6100 - RJ45 CAT6 Pass-Through Connectors (Pack of 100)

The Jonard Tools RJ45 CAT6 Pass-Through Connectors are used by network installers/technicians in order to terminate CAT6 network cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating a round network cable or even replacing an existing connector. These connectors feature the following:

See Product Detail

RJ45-650 - RJ45 CAT6 Pass-Through Connectors (Pack of 50)

The Jonard Tools RJ45 CAT6 Pass-Through Connectors are used by network installers/technicians in order to terminate CAT6 network cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating a round network cable or even replacing an existing connector. These connectors feature the following:

See Product Detail

August 2019

MS-426RB - Replacement Blade Set for MS-426

MS-426RB - Replacement Blade Set for MS-426

This is the replacement blade set for the MS-426 Fiber Optic Mid Span Slit & Ring Tool. This replacement blade set is for cable diameters from 5.8 mm to 12 mm. The blades are made for long term use and last for up to 5,000 slits/cuts.

See Product Detail

MS-426 - Mid Span Slit & Ring Tool (5.8 mm-12 mm)

The patented and award-winning MS-426 Mid Span Slit and Ring Tool is designed to provide easy access to optical fibers in Prysmian ESMF Optical Mini FlexTube® cables (as well as other thick-walled 5.8 to 12 mm diameter jackets). Building on the popularity of the Jonard Tools MS-6 and MS-26 Fiber Optic Mid Span Slitting Tools, we have incorporated a ring feature in the tool to make it even more versatile.

See Product Detail

TK-86 - COAX Tool Kit with Universal Compression Tool for RG59/6 and CAT/TP Cables

The TK-86 COAX Tool Kit is designed specifically for technicians working in the Security & Alarm industry or Home Automation market. This kit is perfect for repair and maintenance of CATV cable networks, Security & Alarm and computer networks. This tool kit is for any technician and features the CT-200 Universal Compression Tool and UST-150 Cable Stripping Tool.

Kit includes:

See Product Detail

July 2019

TK-106 - Fiber Optic Mid Span Slit & Ring Tool Kit+

The TK-106 Fiber Optic Mid Span Slitting & Ringing Tool Kit provides an array of tools designed to provide easy access into fiber optic cables and buffer tubes.

See Product Detail

TWAF-71630K - F Connector Torque Wrench, Full Head 7/16", 30 in-lb, Pink

Discontinued

5% of all proceeds will be donated for Breast Cancer Awareness to BCFR - Breast Cancer Research Foundation!

Designed for 7/16" F Connectors, this full-size open head torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening. This torque wrench features the following:

See Product Detail

TK-105 - Fiber Optic Mid Span Slit & Ring Tool Kit

TK-105 - Fiber Optic Mid Span Slit & Ring Tool Kit

The TK-105 Fiber Optic Mid Span Slitting & Ringing Tool Kit provides an array of tools designed to provide easy access into fiber optic cables and buffer tubes.

See Product Detail

CSS-135 - Replacement Blade for CSS-59M

CSS-135 - Replacement Blade for CSS-59M

The Replacement Blade Cartridge is for the Mini COAX Stub End Cable Stripper (CSS-59M). This cartridge features the following:

See Product Detail

CSS-59M - Mini COAX Stub End Stripper (9 mm/7 mm)

The CSS-59M is a coaxial cable stripper specifically designed to strip the stub end of a mini coax cable in a wall outlet, exposing 9 mm of braid and 7 mm of the center conductor, which eliminates the need to run new cable. This coaxial cable stripper features the following:

See Product Detail

June 2019

AHC-10 - Adjustable Round Hole Cutter, 2.2"-10"

The Jonard Tools AHC-10 adjustable hole cutter is designed for cutting round holes in ceilings, walls, and floors and is the perfect tool for installing recessed speakers, lighting, or other round objects. This adjustable hole cutter features the following:

See Product Detail

WTL-32M - Wall Box Template & Level for Metal Boxes, 1-Gang and 2-Gang

Coming soon

Designed specifically for cutting out single and double gang metal old work boxes, this wall template level is perfect for ensuring the boxes are level every time. This wall template level features the following:

See Product Detail

WTL-34 - Wall Box Template & Level for Non-Metallic Boxes, 3-Gang and 4-Gang

Coming soon

Designed specifically for cutting out 3 and 4-gang non-metallic old work boxes, this wall template level is perfect for ensuring the boxes are level every time. This wall template level features the following:

See Product Detail

WTL-12 - Wall Box Template & Level for Non-Metallic Boxes, 1-Gang and 2-Gang

Designed specifically for cutting out single and double gang non-metallic old work boxes, this wall template level is perfect for ensuring the boxes are level every time. This wall template level features the following:

See Product Detail

CMP-1226 - M22520/1-01 Military Grade Precision Crimper

CMP-1226 - M22520/1-01 Military Grade Precision Crimper

Designed for use with our CMP-3 (M22520/1-02) turret head and most other military grade turret heads, this precision crimping tool is perfect for crimping front release connector contact pins onto 12-26 AWG wire. This crimper features the following:

See Product Detail

CMP-3 - M22520/1-02 Military Grade Turret Head

CMP-3 - M22520/1-02 Military Grade Turret Head

Designed for use with our CMP-1226 Precision Crimper or other M22520/1-01 crimpers, this turret head is perfect for crimping 12, 16, and 20 front release connector contact pins onto 12-26 AWG wire. This turret head features the following:

See Product Detail

May 2019

WSC-826 - Wire Stripper & Crimper, 8-26 AWG

WSC-826 - Wire Stripper & Crimper (8 - 26 AWG)

The Jonard Tools WSC-826 is a multi-function wire stripper designed to cut and strip wire from 8-26 AWG (3.26 mm-0.40 mm) without any adjustments needed. This wire stripper features the following:

See Product Detail

FDC-66 - Fiber Scraps Disposal Can

FDC-66 Fiber Scraps Disposal Can

The Fiber Scraps Disposal Can allows safe disposal of cleaved fiber ends. The disposal can features the following: 

  • Twist lock cover locks scraps in the disposal can for safe and easy disposal
  • Disposal can has a 2 oz capacity with a paperboard body and plastic top and bottom
  • Lightweight design to accommodate any tool kit or splice/connector station.
See Product Detail

April 2019

UST-135 - COAX Stripping Tool for RG7 and RG11 Cables

UST-135 - COAX Stripping Tool for RG7 and RG11 Cables

The Jonard Tools UST-135 COAX stripping tool is designed to strip RG7 and RG11 coaxial cables for quick and easy termination. This COAX stripping tool features the following:

See Product Detail