Designed to facilitate telecom and datacom installations, these glow rods are perfect for pushing and pulling cables in low light applications. These glow rods feature the following:

Designed to facilitate telecom and datacom installations, these glow rods are perfect for pushing and pulling cables in low light applications. These glow rods feature the following:

Designed and Engineered by: Ferret Tools
Authorized Channel Partner: Jonard Tools

Designed and engineered by Ferret Tools for use with the Ferret Pro or Ferret Plus cameras.

Designed and Engineered by: Ferret Tools
Authorized Channel Partner: Jonard Tools

Designed and Engineered by: Ferret Tools
Authorized Channel Partner: Jonard Tools

The Ferret Pro, designed and engineered by Ferret Tools, is a professional and durable inspection camera. Based on the award-winning electronic design of the original Ferret, the Ferret Pro is:

Designed and Engineered by: Ferret Tools
Authorized Channel Partner: Jonard Tools

The Ferret Lite, designed and engineered by Ferret Tools, is a general-purpose inspection camera that allows you to see inside hard to reach locations. Based on the award-winning electronic design of the original Ferret, the Ferret Lite is

Loading a protection sleeve onto a fiber can be tedious, even for the most experienced technicians. Plus, if they have physical impairments such as poor eyesight then it can become nearly impossible. Designed to make loading protection sleeves onto fiber quick and easy, the PSI-15 QuickSleever tool is ideal for aligning fiber to the holes of protection sleeves and is a real timesaver. This protection sleeve insertion tool features the following:

Designed to illuminate dark areas and guide glow rods through acoustical ceilings or crawl spaces, the WhiskLight™ is the perfect flashlight or whisk attachment head for glow rods and fish sticks. This attachment head also features the following:

Designed to quickly identify the direction of transmitted fiber and display the relative core power without damaging the fiber, this fiber identifier is the perfect tool for identifying fiber in network systems without disrupting the network. This fiber identifier also features the following:

Designed to facilitate the installation, service, and maintenance of analog telephone lines, this telephone butt set has all the essential functions for testing telephone lines such as detecting dial tone, making and receiving calls, and tone and pulse modes. This telephone test set also features the following:

Multi-tool attachment head for cutting double gang boxes in drywall for existing construction (old work) boxes. This electrical wall box cutter features the following:

Designed for heavy-duty use, This cable cutter is designed to cut 336 MCM (170 mm²) ACSR, 400 MCM (202 mm²) copper, or 600 MCM (304 mm²) aluminum cables, and most cables up to 30mm in diameter. This cable cutter features the following:

This kit provides all the necessary tools for cutting, crimping and terminating cat5 and cat5e network cables.

• Ratchting modular crimping tool for use on RJ45 regular and pass-through connectors. Also works on RJ11 and RJ22 regular connectors.
• Punch Down tool with durable 110 type blade for wire termination
• Ergonomic Electrician scissors for added comfort
• Jacket stripper for removing cable jackets
• RJ45 CAT5/5e pass-through connectors, 50 pcs.
• Carry case for holding tools and connectors in one place

Designed specifically for cutting out single and double gang metal old work boxes, this wall template level is perfect for ensuring the boxes are level every time. This wall template level features the following:

Featuring our most popular slitting, ringing, stripping, and cutting tools, this Fiber Prep Kit+ provides a large array of tools needed to access and prepare fiber optic cables for termination. This tool kit features the following:

Featuring our most popular slitting, ringing, stripping, and cutting tools, this Fiber Prep Kit+ provides a large array of tools needed to access and prepare fiber optic cables for termination. This tool kit features the following:

Designed specifically for the security and alarm industry, the TK-611 16 Piece Security & Alarm Tool Kit provides all the tools needed to prep COAX, network, and power cables for termination as well as tools for tracing and testing applications.

Featuring our most popular slitting, ringing, stripping, and cutting tools, this Fiber Prep Kit+ provides a large array of tools needed to access and prepare fiber optic cables for termination. This tool kit features the following:

Designed for testing the continuity of cables and generating tones for identifying cables with ABN clips, this cable tester and toner is perfect for use on RJ45, BNC, and F connectorized coaxial, and other non-connectorized cables. This cable tester and toner feature the following:

TET-700BC - Cable Tester & Toner+ with ABN:

Designed to identify the presence of AC voltage in outlets, switches, circuit breakers, fuses, wires, and cables, this voltage tester is the perfect tool for verifying low and high voltage in live circuits. This voltage tester features the following:

Specifically designed to unlock Highfield 93180128 and 93180124 locks, this #6 key is able to unlock utility box locks with inside diameters of 0.158".  This barrel lock key features the following:

• Made from High Carbon alloy steel for heavy-duty use
• Smooth plunger operation and heavy-duty spring designed for high strength and durability
• The tool is serialized for extra protection
• Designed to work on #6 locks such as Highfield lock numbers 93180128, 93180124

Designed to perform live testing with OLT equipment, this PON Power Meter is perfect for use during FTTx/PON service tune-up or maintenance. It is able to simultaneously test and measure the signal power of voice, data, and video connections, and is essential for the construction and maintenance of PON systems. This Power Meter also features the following:

Designed to strip the jacket and insulated conductors from 12/2 and 14/2 NM cables. The tool also has a wire cutter and serrated nose built-in for added convenience:

Designed for use on Rollable or Spyder type ribbon fiber optic cables, this tool is perfect for separating the matrix of fibers in ribbon fiber optic cables quickly and easily. This tool also features the following:

• Can be used on Rollable or Spyder type ribbon fiber optic cables that contain up to 24 optical fibers each
• Coil spring applies a set amount of pressure, keeping the fibers safe while being separated
• Compact lightweight design is perfect for storage or on-the-go use

Made with neodymium magnets, these magnetic cable holders are ideal for installing cables on high ceilings or other places quickly and easily. These magnetic holders feature the following:

This impact insertion tool is designed to terminate wires on 3M MS2 cross-connect panels quickly and easily. This insertion tool also features the following:

• Automatically terminates wires onto cross-connect panels without disturbing other connections
• Slim design allows you to use the tool in compact or hard-to-reach places
• Ergonomically designed handle is comfortable and easy to use
• Holes in the bottom of the handle so tool can be tethered

The Jonard Tools CableSaber™ is the ultimate tool for gaining mid-span access to armored or thick jacketed cables 4 mm-28.6 mm (0.157”-1.125”) in diameter. This mid-span cable slit and ring tool also features the following:

Designed to slit and shave the webbing off messengered hardline COAX cables and figure 8 fiber cables, the Jonard Tools WSS-4625 Web Slitter and Shaver is the perfect tool for working with aerial messenger cables ranging from 0.400"-0.625" in diameter. This web slitter and shaver also features the following:

Designed to create mid-span slits and window cuts in ducts and heavy-duty cables, this ratcheting cable slitter is the perfect tool for slitting and ringing cables or ducts greater than 25 mm in diameter. This duct slitter features the following:

This product is the replacement blade for the RCS-30 Ratcheting Duct and Cable Slitter. This blade is made of steel for high durability and long life. It penetrates duct walls up to 5 mm thick, allowing you to make mid span window cuts in cables and ducts.

This product is the replacement blade cartridge specifically designed for the WSS-4625 Web Slitter and Shaving Tool. This replacement blade cartridge features the following:

• Ultra-sharp steel slitting blade slits even the thickest webbing with ease
• Shaving blade removes excess webbing to provide smooth surface for cable termination
• For use with WSS-4625 on cables 0.400"-0.625" in diameter

The Jonard Tools JIC-190 Flush Cut Kevlar® Cutters are designed to cut Kevlar®, cabling insulation, tape, cable ties, and other materials flush to the surface. These cutters feature the following:

Designed to test HDMI and Mini HDMI cables with ease, this HDMI Cable Tester is the perfect tool for evaluating HDMI cables that may have shorts, open circuits, or have wire pairs in the wrong order. This HDMI tester features the following:

The EZSR-23 Fiber Slit & Ring Tool has been specially designed to prepare 2 mm and 3 mm fiber optic cables for connecting with Fitel EZ!Fuse™ SC & LC Splice-On Connectors. This tool saves time and makes the connecting process extremely easy by having a ringing dial and slitting channel with preset lengths. This slit and ring tool also features the following:

The Jonard Tools SPK-100 Solar Panel Crimping Tool Kit w/ Insulated Screwdrivers is designed to facilitate the installation and maintenance of solar panels. It includes a variety of tools to make installing and maintaining solar panels quick and easy.

This crimping and insulated screwdriver tool kit include the following tools:

The Jonard Tools TK-183 Fiber Optic Connector Clean and Prep Kit offers cleaning and preparation products for use on 1.25 mm and 2.5 mm connector end-faces and bulkhead adapters. The kit features the following:

Designed for heavy duty use, this utility knife is the perfect addition to any tradesman or technician's tool kit. This utility knife features the following:

Made in the USA, this pack of 50 utility blades is perfect for replacing blades in a utility knife, such as our UKN-3. These utility blades feature the following:

• Ultra-sharp US-made 1095 carbon steel heavy duty blades cut through drywall, zipties, packaging, and more with ease
• Blades are made according to standard utility blade specifications and are compatible with all standard utility knives
• Dull or damaged blades can be stored in the top of the unit for easy clean up
• Blade dispenser has two hanging holes for wall mounting

The Jonard Tools TK-179 Advanced Fiber Optic Prep Kit provides an array of tools needed to access and prepare a fiber optic cable for termination. It includes a carrying case and a variety of tools for multiple applications such as stripping, ringing, cutting, cleaning, and preparation of fiber optic cable. This tool kit is ideal for any fiber optic technician.

Designed with a curved blade and insulated handle, this cable sheathing knife is the perfect tool for slitting or cutting the sheathing off cables without damaging the conductor insulation inside. This cable sheathing knife features the following:

The Jonard Tools CC-2721WS Cable Caddy is made of 7/8” (22 mm) diameter tubular steel, includes wheels, and has a permanently mounted strap for enhanced portability. This cable caddy features the following:

Designed for torquing F connectors to a preset torque of 30 in-lb (3.4 N-m), this torque wrench is perfect for tightening or loosening F connectors in high-density locations. This torque wrench features the following:

Designed to crimp RJ11/12 and RJ45 connectors onto CAT3, CAT5/5E, and CAT6 cables, this pass-through connector crimper is perfect for any network installer. This crimper features the following:

Designed to provide either 1310 nm or 1550 nm wavelengths, this optical light source is the perfect tool for providing a stable light source for single mode fiber measurements. This optical light source features the following:

Designed for tightening 3.5-12 DIN connectors to 176 in-lb (20 N-m), this full-size open head torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening. This torque wrench features the following:

Designed for torquing F connectors to 30 in-lb (3.4 N-m), this torque wrench is perfect for tightening or loosening F connectors in high-density locations. This torque wrench features the following:

Designed for torquing F connectors to 30 in-lb (3.4 N-m), this torque wrench is perfect for tightening or loosening F connectors in high-density locations. This torque wrench features the following:

Designed for torquing 7/16" F connectors, this torque wrench shaft is made for use with our CTW-H handle (sold separately) to tighten or loosen F connectors in high-density locations. This shaft features the following:

Designed for torquing 7/16" F connectors, this torque wrench shaft is made for use with our CTW-H handle (sold separately) to tighten or loosen F connectors in high-density locations. This shaft features the following:

Designed for use with our CTW-7168 or CTW-71612 F connector torque wrench shafts (sold separately), this handle can be used to tighten or loosen F connectors in high-density locations. This handle features the following:

This product is the replacement blade set for the UC-4569 Pass-Through Crimping Tool and includes 6 replacement blades. The blades are made for heavy-duty use and can perform up to 3,000 cuts. This replacement blade set includes (2) cable-cutting blades, (2) pass-through cutting blades, and (2) stripping blades.

The big brother to our popular CST-1900, the PATENTED CST-4000 Round Cable Strip & Ring Tool is designed for fast and precise removal of cable jackets from round cables that are 3/4” to 1 5/8” (19 mm to 40 mm) in diameter. This round cable stripper features the following:

Designed to insert and extract LC connectors in high-density patch panels, the FCT-200 is the perfect tool for working with LC connectors in tightly packed bulkheads. This tool features the following:

Designed to quickly trace and identify cables, wires, and wire pairs, the Jonard Tools TETP-800 tone and probe kit is the perfect kit for any Voice Data Video (VDV) professional. This kit features the following:

Tester & Tone Generator:

• Provides tone via built-in RJ11 connector or alligator clips
• Works with our TEP-100 tracing probe or others to identify cables
• Able to test the continuity of cables and the polarity of telephone lines
• Includes (1) 9V battery required for operation

Tracing Probe:

Designed to strip FTTH drop cables sized 3.1 mm by 2.0 mm, this drop cable stripper strips the outer jacket of drop cables and cuts the strength members to expose the fiber inside. This drop cable stripper features the following:

• Works on cables with FRP or steel strength members
• Removes the outer jacket without damaging or nicking the fiber
• Non-slip ergonomic handle helps prevent hand grip fatigue
• Fiber support is scaled to help determine strip length

Designed to grip RG59, RG6, RG7, and RG11 cables, this COAX cable gripping tool facilitates the stripping, slitting, splicing, and other functions of coaxial cables. This cable gripping tool features the following:

• Perfect for gripping RG59, RG6, RG7, RG11, and many other cables
• Soft rubber material conforms to the shape of the cable to grip it tightly
• Compact shape and belt loop hole make it convenient for storage and transport
• Two separate gripping grooves for multiple cable sizes: 3 mm to 6 mm diameter and 6 mm to 12 mm diameter

Tefzel®, also referred to as ETFE (ethylene tetrafluoroethylene copolymer), is a thin but resilient insulation material designed for aerospace applications. It is ideal for use as appliance, panel, or wrapping wire and can also be used in the installation of aviation electronics equipment. Tefzel® wire’s excellent material toughness, electrical properties, and resistance to heat flames, chemicals, and radiation make it the perfect wire where high durability is required. Our Tefzel® wire also features the following:

Designed to crimp MC4 connectors onto 14, 12, or 10 AWG (2.5 / 4.0 / 6 mm²) solar panel wire, this crimper is the perfect tool for installing and maintaining solar panel connectors. This crimper features the following:

The Jonard Tools SPK-90 Solar Panel Crimping Tool Kit is designed to facilitate the installation and maintenance of solar panels. It includes a variety tools to make installing and maintaining solar panels quick and easy.

This crimping tool kit includes the following tools:

Designed to provide easy access to BNC connectors, this 2.25” BNC Connector Tool is perfect for installing or removing BNC connectors in high-density locations. This tool features the following:

• Compact design allows you to reach connectors in hard-to-reach places
• Knurled handle provides a secure grip while using the tool
• Steel loop can easily attach to a carabiner or key ring and can be used to facilitate removal or installation of connectors
• Made from a high carbon steel alloy with a nickel-plated finish for maximum durability

This crimping die, when used in conjunction with a Solar Panel Crimper (such as our SPC-MC4), is able to crimp MC3 connectors onto 14, 12, and 10 AWG (2.5 mm², 4 mm², 6 mm²) cable. It is ideal for solar panel installers when termination or replacing a new MC3 solar panel connector. The crimping die features the following:

• Crimps wire gauges sizes 14, 12, 10 AWG (2.5 / 4.0 / 6.0 mm²)
• Perfectly crimps MC3 Solar Connectors
• Compatible with ratcheting solar crimping tools, like our SDC-MC4

This crimping die, when used in conjunction with a Solar Panel Crimper (such as our SPC-MC4), is able to crimp MC4 connectors onto 14, 12, and 10 AWG (2.5 mm², 4 mm², 6 mm²) cable. It is ideal for solar panel installers when termination or replacing a new MC4 solar panel connector. The crimping die features the following:

• Crimps wire gauges sizes 14, 12, 10 AWG (2.5 / 4.0 / 6.0 mm²)
• Perfectly crimps MC4 Solar Connectors
• Compatible with ratcheting solar crimping tools, like our SDC-MC4

Designed to lock and unlock MC4 connectors for termination or removal, these solar panel spanners are ideal for solar panel installers when terminating or replacing a new MC4 solar panel connector. These solar panel spanners feature the following:

• Made from hard plastic for high durability and long life
• Perfect for breaking MC4 connections that have been locked together
• Great for tightening cable glands on MC4 connectors
• Lightweight and easy to use design

The Jonard Tools FOR-3000 Round Cable Slitter is designed to easily and safely open round fiber optic cable jackets from 9 mm to 19 mm in diameter. It is ideal for any FTTH or maintenance technician that needs to work with round fiber optic cables, whether mid span or end-run. This round cable slitter features the following:

Designed to create quick, clean, and straight cuts in fiber ducts up to 28 mm, this duct cutter is perfect for cutting PVC, CPVC, HDPE, and other plastic tubing. The micro duct cutter features the following:

• Triangular blade provides square and straight cuts by holding the tubing in place
• Spring-loaded jaws make it quick and easy to use
• Carbon steel blade with black oxide finish is durable and easily replaceable
• Safety lock keeps tool close when not in use
• Molded ribbed grips for comfort and secure holding

Designed to facilitate telecom and datacom installations, these glow rods are the perfect tool for pushing and pulling cables in low light applications. These glow rods feature the following:

Designed for tightening 4.3-10 DIN connectors to 44 in-lb (5 N-m), this full-size open head torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening. This torque wrench features the following:

The Jonard Tools FCCN-250 Fiber End-Face Ferrule Cleaner is designed to provide exceptional cleaning performance on fiber optic connectors. It cleans 2.5 mm ferrules in recessed fiber optic adapters or individual FC, SC, or ST connectors. This cleaner features the following:

The HSC-715QR hardline coring and stripping tool kit is designed to core and strip 0.715” (18.16 mm) diameter Quantum Reach cables such as QR715 cable and other similar sized cables. This kit is used by construction crews, cable splicers, and maintenance technicians on hardline cables whether aerial or underground and for distribution or drop applications.

The Jonard Tools FC-500 precision fiber cleaver is designed to provide a precise cleave and prepare a fiber to be fusion spliced for 250 µm and 900 µm coated optical fiber. This fiber cleaver features the following:

The Jonard Tools WS-822 Wire Stripper and Cutter was designed with the technician and tradesman in mind. This wire stripping and cutting tool features the following:

The Jonard Tools RJ45 CAT6 Pass-Through Connectors are used by network installers/technicians in order to terminate CAT6 network cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating a round network cable or even replacing an existing connector. These connectors feature the following:

The Jonard Tools RJ45 CAT5e Pass-Through Connectors are used by network installers/technicians in order to terminate CAT5e network cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating a round network cable or even replacing an existing connector. These connectors feature the following:

The Jonard Tools RJ45 CAT5e Pass-Through Connectors are used by network installers/technicians in order to terminate CAT5e network cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating a round network cable or even replacing an existing connector. These connectors feature the following:

The Jonard Tools RJ45 CAT6 Pass-Through Connectors are used by network installers/technicians in order to terminate CAT6 network cables with a pass-through crimper. They are used in households and businesses and are ideal for terminating a round network cable or even replacing an existing connector. These connectors feature the following:

This is the replacement blade set for the MS-426 Fiber Optic Mid Span Slit & Ring Tool. This replacement blade set is for cable diameters from 5.8 mm to 12 mm. The blades are made for long term use and last for up to 5,000 slits/cuts.

The TK-86 COAX Tool Kit is designed specifically for technicians working in the Security & Alarm industry or Home Automation market. This kit is perfect for repair and maintenance of CATV cable networks, Security & Alarm and computer networks. This tool kit is for any technician and features the CT-200 Universal Compression Tool and UST-150 Cable Stripping Tool.

Kit includes:

The PATENTED and award-winning MS-426 Mid Span Slit and Ring Tool is designed to provide easy access to optical fibers in Prysmian ESMF Optical Mini FlexTube® cables (as well as other thick-walled 5.8 to 12 mm diameter jackets). Building on the popularity of the Jonard Tools MS-6 and MS-26 Fiber Optic Mid Span Slitting Tools, we have incorporated a ring feature in the tool to make it even more versatile.

Discontinued

5% of all proceeds will be donated for Breast Cancer Awareness to BCFR - Breast Cancer Research Foundation!

Designed for 7/16" F Connectors, this full-size open head torque wrench provides a perfectly calibrated amount of torque to prevent damage from over-tightening or signal loss from under-tightening. This torque wrench features the following: