As the holiday season approaches, many of us are already starting to think about what to get our loved ones for Christmas. For the electrician, tech enthusiast, or DIY aficionado in your life, finding something that is both useful and affordable can certainly be a tough task. For that reason, we've compiled a list of the top 5 Low Voltage Tools to get your loved ones for Christmas! Aimed to save them valuable time and money, these tools promise to be year-round companions in the pursuit of all things low voltage. Without further ado, here are the top 5 low voltage Christmas gifts.

The Cable Pulley (CP-475)

Kicking off the list we have our trusty Cable Pulleys! Cable Pulleys are a type of tool primarily used for the purpose of guiding and supporting cables as they are being installed, acting as a second pair of hands. Typically made of metal or plastic, these pulleys are commonly used in various applications where pulling cables is needed.

Using the Cable Pulley is very easy. The first step is to make sure that you attach it to a mounting point. Once installed, you can run the cable on the pulley- as the cable is being pulled, the pulley keeps it aligned with the direction of the pull to prevent it from snagging or kinking. Cable Pulleys are of immense value because they make the daunting task of pulling cables through tight spaces effortless, offering guidance and acting as a second pair of hands. The swivel snap also helps you easily remove cables if need be. Not only do Cable Pulleys make wire installation far more efficient, but they also reduce the number of workers needed for the job, which in turn reduces cost. 

Check out our CP-475 for a smooth pull and enhanced durability!

The MagneTriever (MRS-24)

Next on our list is the Magnetic Retriever! A Magnetic Retriever is a tool used for retrieving cables or small objects from hard-to-reach areas. It typically consists of a long, flexible shaft with a powerful magnet at the end. The shaft can be bent to fit into tight spaces, and the magnet is strong enough to attract and hold small objects.

To use the Magnetriever®, you must first drill a hole in your wall or top plate, as well as a retriever hole where you plan to pull the wires. You can then take the ball chain and snake it through the top hole. The chain has a three quarter inch ring at the end to keep it from falling through the hole, so long as you drill the hole less than three quarters of an inch. Next, you simply take the magnetic retriever and stick it at the bottom hole to pull the chain through.

Sometimes, it's difficult to align the measurements perfectly, causing the chain to end up far away from your retriever hole. If that happens, there's an easy solution! Simply bend the magnetic retriever in the shape of an "S", insert the retriever in the hole, and swing it around until you find the chain. If you want, you can use the hook to pull the chain out in order to avoid having to find the chain all over again.

The Magnetriever® is very valuable and useful because it allows you to easily fish wires through a wall. Whether it be an installation project or a simple DIY task, this tool can remove the burden of having to spend money for someone else to do it. Check out our MRS-24 for the most reliable option!

Wall Box Template & Level (WTL-12)

Third on our list is the wall box template & level! A wall box template and level is a tool used to mark the location of electrical boxes on a wall before cutting them out. It also has a built-in level to ensure that the boxes are installed straight. This is important because if the boxes are not installed straight, the covers will not fit properly and the electrical components will not be aligned correctly.

Wall templates and levels are typically made of plastic or metal and have a variety of features, such as cutout markings for different sizes of electrical boxes, levels to ensure that the boxes are installed straight, screw holes for securing the template to the wall, and centerlines for marking the center of the boxes

To use a wall template and level, first hold the template up to the wall in the desired location of the electrical box. The built-in level will ensure that the template is straight. Then, use a writing utensil to trace the cutout markings onto the wall. If you want to free up your hands while outlining, you also have the option to screw the wall plate to the wall, which may make it easier for you to create the cut. Once the outline is finalized, you can use a saw or a drill to perform the cut.

Wall templates and levels are a valuable tool for any electrician or DIYer who needs to install electrical boxes. They help to ensure that the boxes are installed correctly, saving you much time and trouble. For the most accurate and precise measure, check out our WTL-12!

Cable Comb (CCB-25)

Next on our list is the cable comb! A cable comb is a tool used to organize and manage multiple cables. It typically consists of a row of plastic or metal teeth that are spaced apart to accommodate the desired number of cables. The cables are inserted into the teeth, which then hold them in place and prevent them from becoming tangled or intertwined. Cable combs are commonly used in data centers, telecommunications rooms, and other environments where multiple cables are tightly bundled together, helping you organize and identify cables. They can also be used for home or office applications, such as organizing the cables behind a computer desk or entertainment center.

Using the cable comb is very easy and self-explanatory- simply insert the cables into the teeth, secure the hub, and pull the cables out to straighten them. Check out our CCB-25 to neatly bundle your cables.

Adjustable Round Hole Cutter (AHC-10)

Last, but certainly not least, we have our adjustable round hole cutter! An adjustable round hole cutter is a versatile tool that can be used to cut holes in a variety of materials, including wood, drywall, plastic, and sheet metal. Adjustable round hole cutters are a great tool for a variety of tasks, including installing recessed lighting fixtures, cutting holes for electrical outlets, and making large holes for ducting or pipes. They are also a popular choice for DIY projects, such as creating custom speaker enclosures or cutting holes for doorknobs.

To use an adjustable round hole cutter, simply attach the hole cutter to a drill and adjust the size of the hole to the desired diameter. Then, place the cutter against the wall or ceiling and slowly power the drill, applying pressure as needed. The blades will create a clean, round hole in the wall or ceiling.

Check out our popular AHC-10, designed for an accurate and adjustable cut! What's really neat about ours is our polycarbonate transparent dust shield that collects dust and prevents chips from flying into your eyes.

Conclusion

These tools will not only make for an exciting Christmas present, but they will also help make the next year full of productivity and joy. With that being said, we wish everyone a Merry Christmas and a Happy New Year!