Page 26 - Jonard Tools - Catalog 2021_0

Torque Wrenches with Attached Security Shield Tool
The security shield tool is permanently attached, 4¾” (120 mm), and pivots in
90-degree increments. These tools are ideal for hard to reach shielded F Connector
fittings where a preset torque is required.

The TWAFST-71622 is set at 22 in-lb and 2.49 N-m
The TWAFST-71630 is set at 30 in-lb and 3.39 N-m
The TWSW-40 is set at 40 in-lb and 4.52 N-m; can be used with any 3/8” drive
sockets including TWS-38/10
SPECS TWAFST-71622 TWAFST-71630 TWSW-40
DESCRIPTION Torque Wrench w/ SST Torque Wrench w/ SST Right Angle Torque Wrench,
7/16”, 22 in-lb 7/16”, 30 in-lb Swivel Head, 40 in-lb

TWAFST-71622 TWAFST-71630 TWSW-40 TORQUE 22 in-lb and 2.49 N-m 30 in-lb and 3.39 N-m 40 in-lb and 4.52 N-m
QR CODE

3/8” Socket For TWSW-40 - Pkg 10 - TWS-38/10
Designed to be used on 3/8” shield bond connectors with an appropriate driver, these sockets are perfect for
communication cables and other ground connections.
TWS-38/10

Connector Torque Wrenches - CTW-7163812

Designed for torquing F connectors to a preset torque of 30 in-lb
(3.4 N-m), this torque wrench is perfect for tightening or loosening
F connectors in high-density locations. CTW-7163812
This torque wrench includes:
• CTW-H F Connector Torque Wrench Handle
• CTW-7168 F Connector Torque Wrench Shaft, 8”
• CTW-71612 F Connector Torque Wrench Shaft, 12”
• CTW-71638 F Connector Torque Wrench, 30 in-lb, 8” (includes CTW-H and
CTW-7168)
• CTW-716312 F Connector Torque Wrench, 30 in-lb, 12” (includes CTW-H and
CTW-71612)
• CTW-7163812 F Connector Torque Wrench, 30 in-lb, 8” and 12” (includes
CTW-H, CTW-7168, and CTW-71612)

SPECS CTW-H CTW-7168 CTW-71612 CTW-71638 CTW-716312 CTW-7163812
LENGTH 5” 8” 12” 8.63” (21.91 cm) 13” (33.0 cm) 8.625” (21.91 cm)
and 13” (33.0 cm)
PARTS INCLUDES N/A N/A N/A CTW-H and CTW-7168 CTW-H and CTW-71612 CTW-H, CTW-7168,
and CTW-71612
QR CODE

25