Page 50 - Jonard Tools - Catalog 2021_1

Long Nose and Side Cutting Pliers - JIC-842
Pliers are for general use looping, bending and cutting. Grips small
wires and parts and reaches into tight spaces. Jaws are knurled,
serrated and have side cutting blades. Cushion gripped yellow JIC-842
plastic handle.

7
Jaw Length: 1 /8” (47.63 mm), Overall Length: 6 /4” (171 mm)
3
Long Nose General Use Pliers - BLONGNOSE

Chain nose pliers for general use. Inner surface of the jaws are knurled
near the end to facilitate gripping wire, binding post nuts etc.
Red plastic handle. BLONGNOSE
7
Jaw Length: 2” (50.8 mm), Overall Length: 6 /8” (174 mm)

Short Nose B Type Plier - BSHORTNOSE
Intended for use in skinning 22-24 AWG wire and crushing insulation
in nose slot. The front portion of the jaws is narrowed, and a portion of
the inner face of one jaw is relieved to skin insulation from wire. The BSHORTNOSE
inner surface of the jaws are serrated to facilitate gripping wire.

Jaw Length: 1 /2” 38.10 mm), Overall Length: 6 /2” (165 mm)
1
1

Long Nose Gripping Pressing Pliers - ELONGNOSE
Long nose pliers for gripping and pressing. Inner surface of the jaws
are knurled near the end to facilitate gripping wire, binding post nuts
etc. Aluminum oxide insulation coating on the outside nose surface. ELONGNOSE
The inside gripping jaws are provided with mated grooves near the joint
for use in pressing .032/.035” brass sleeves. One stripping hole .054” diameter.

Jaw Length: 1 /8” (47.63 mm), Overall Length: 6 /8” (174 mm)
7
7
L3 Type Cut Crush Strip Pliers - KS21257L3

Long nose with side cutter, crushing slot, one 0.03” stripping hole and
a thin knurled nose to facilitate handling wire at the terminals.
KS21257L3
1
1
Jaw Length: 1 /2” (38.1 mm), Overall Length: 6 /2” (165 mm)

Heat Coil Pliers - PLS-5
Designed for installing and extracting heat coils, fuses and other
cylindrical shaped components. The thin nosed jaw allows easy
access to tight restricted areas. PLS-5
13
Jaw Length: 1 /16” (46 mm), Overall Length: 5” (127 mm)

49