Page 49 - Jonard Tools - Catalog 2021_1

jonard.com | Hand Tools

Lineman’s Plier W/ Fish Tape Puller & Crimper
- JIC-685
Designed for heavy duty use in construction and maintenance work.
These pliers are high leverage for cutting bolts, nails, and many gauges JIC-685
of wire including high-strength wire. Fish tape pulling feature easily pulls 1/8”
or 1/4” steel fish tape without damaging the tape. Built in crimper feature works
best on non-insulated connectors, lugs and terminals. Cushioned grip, comfortable
handles are red plastic coated to approximately .007”.

Cutter Length: 3/4” (19.05 mm), Overall Length: 9 /2” (241 mm)
1

Connector-Crimper Pliers - JIC-891
Connector-Crimping Pliers with Side Cutters designed to press UG, UR,
UY, 709 series connectors, crimping “B” type connectors, and AMP tel
splice connectors. A special stop behind cut out prevents damage to JIC-891
connectors. Utilized on combinations of plastic and pulp insulated 19, 22, 24 and
26 gauge copper conductors as well as 20 gauge plastic insulated copper steel
wire. Comes with side cutter and yellow handles.

Jaw Length: 1” (25.4 mm), Overall Length: 5 /16” (131 mm)
3
Long Nose Switchboard Plier - JIC-203
Pliers are for general use looping, bending and cutting. Grips small
wires and parts and reaches into tight spaces. Jaws are knurled,
serrated and have side cutting blades. Two stripping holes for 19 & 22 JIC-203
AWG wire. Cushion gripped yellow plastic handles.

Overall Length: 6 /8” (174 mm)
7

Telecom Long Nose Pliers - JIC-21257

This Long nose pliers has side cutting blades, a crushing slot, one
.030” stripping hole, and a thin knurled nose to facilitate handling of
the wire at the central office terminals. The comfortable handles are JIC-21257
yellow plastic dipped.

Jaw Length: 1 /8” (47.63 mm), Overall Length: 6 /8” (174 mm)
7
7
Combo Crimper, Long Nose Pliers - JIC-22148
Five tools in one. Combines the functionality of a long nose plier with
a crimper, stripper, cutter, and crusher. Crimper works for UR/UY/UG,
AMP tel splice connectors, 709 series connectors, and crimping “B” JIC-22148
type connectors. Stripping hole is .030”. See website for more details.

Jaw Length: 1 /8” (47.63 mm), Overall Length: 6 /8” (174 mm)
7
7
Curved Long Nose Plier - JIC-3026

Nose is bent 70° for maximum visibility. Used in confined areas. Design
includes knurled jaws for sure wrapping and looping. Comfortable
ergonomic plastic handles. JIC-3026

Jaw Length: 2” (50.80 mm), Overall Length: 6 /8” (174 mm)
7

48