Page 51 - Jonard Tools - Catalog 2021_0

jonard.com | Hand Tools

Tabbing Shear - TS-850
Tabbing or Cable Sheath Shear for making longitudinal cuts in the
cable sheath and the metallic shield for placement of inner sheath bond
clamps. Plastic formed ergonomic handles for safety and comfort and TS-850
a latch to keep the handles closed when not in use. The volute spring
allows for easy opening and closing.
Overall Length: 8 /2” (216 mm)
1

Slip Joint Side Cut Pliers - BCOMB
For heavy-duty use. Black phosphate finish, machined gripping teeth
and 3/8” hardened wire cutter. Red plastic dipped handle.
BCOMB
5
Number of Positions: 2, Overall Length: 7 /8” (194 mm)

Curved Needle Nose Plier - JIC-3385
Nose is bent 60° for maximum visibility. Used in confined areas for
bending and forming fine wire. Inside jaws and jaw edges are polished
to prevent nicking the wire. Plier has a spring loaded ergonomic design JIC-3385
with a dark blue plastic handle.

Bend Angle: 60°, Overall Length: 5 /2” (139 mm)
1

Ratcheting Cable Cutter - RC-600
Cuts up to 600 mcm stranded copper cable, 750 mcm stranded
3
aluminum cable. Maximum capacity is 1 /4” (45 mm) diameter.
Cleanly cut copper or aluminum & multi-conductor cable up to 600 RC-600
mcm (750 mcm for aluminum). Unique design to hold and cut cable quickly,
easily with minimum effort. Spring design to hold cutter in the open position
when needed. Quick release for easy opening. Large ergonomic handle design.
(Not designed for cutting ACSR or steel).

3
Maximum Cut Capacity: 1 /4” (45 mm), Overall Length: 12” (305 mm)

Ratcheting Cable Cutter - RC-336ACSR
Designed for heavy-duty use, This cable cutter is designed to cut 336
MCM (170 mm²) ACSR, 400 MCM (202 mm²) copper, or 600 MCM
(304 mm²) aluminum cables, and most cables up to 30 mm in diameter. RC-336ACSR

Maximum Cut Capacity: 1 3/4” (4.4 cm), Overall Length: 12” (30.5 cm)

50