Page 91 - Jonard Tools - Catalog 2021_1

jonard.com | Alignment Tools

Trimpot (Pkg of 10) - AT-3767/10
Double ended Trimpot with a hex (Allen) steel .050” and 3/32” long steel screwdriver tip. Ideal for aligning, adjusting, calibrating and
fine tuning of electronic circuitry, potentiometers, oscilloscopes and electronic equipment. Made of a high impact non-conductive
thermoplastic material. 5” long.” AT-3767/10

Alignment Tool (Pkg of 10) - AT-6241/10
2-in-1 non-conductive Alignment Tool 1/4” diameter, stepped down to 5/32” diameter. Ideal for most variable capacitors, coils
and resistors. Also used to harness and separate fine wire terminals in computers, telephones and cables. Made of non-conductive
thermoplastic material. AT-6241/10

Clip Setter - CS-1022
For setting and withdrawing E and C clips with inside diameter of .156” min. and thickness of .025” min. Max inside diameter of 3” and
thickness of .093” One end has a hook with leaf spring tension for removing the clip, the other end has leaf spring for holding clip in
position to insert. CS-1022

Orange Sticks
Static free double ended economical tool made of birch wood. Used for cleaning electrical components and separating contact points,
fine wire and other delicate components. 3/16” diameter x 7” long. The S-389 has one end tapered to a point and the other end to a flat
screwdriver type tip. The S-389M has both ends tapered with a flat screwdriver type tip. Orange
Sticks
JONARD P/N DESCRIPTION
S-389/10 Orange Sticks Point & Flat end Pkg of 10
S-389/100 Orange Sticks Point & Flat end Pkg of 100
S-389M/10 Orange Sticks 2 Flat End Pkg of 10
S-389M/100 Orange Sticks 2 Flat End Pkg of 100

Probe Picks
Tough resilient yellow nylon probe “spudger.” One end is tapered to a 1/16” diameter point having an “L” shaped wire hook extension.
The other end tapers to a flat, 3/16” wide and 1/16” thick, with 2 small notches. Used in electrical contacts. 7” long. Probe Picks

JONARD P/N AVOIRDUPOIS CAPACITY
JIC-22035/10 Insulated Probe Pick Pkg of 10
JIC-22035NT/10 Uninsulated Probe Pick Pkg of 10

Spudger (Pkg of 10) - AT-3112/10
Plastic pencil type spudger tapered to a point on one end and screwdriver tip on other end. Used to form, shape, guide, spudge and
separate fine computer wire terminals, telephone wires and cables. Also used for breaking solder bridges, probing or positioning loose
components. Made of a high impact non-conductive thermoplastic material. 6” long double ended 5/16” diameter. AT-3112/10

90